VEHICLE COMMUNICATION INTERFACE & CAN PRODUCT INFORMATION CHART

PROTOCOLS:
PC INTERFACES:
Product Name J1708 J1850 J1939 J2534 KWP 2000 CAN GM LAN K Line
CAT X X X X X X X X
PassThru + XS X X X X X X X X
Basic + XS * * X X X X X X
Protected XS X X X X X X X X
Blue XS * * X X X X X X
PCI-Intelli CAN X X X X X X X X
PCMCIA II X X X X X X X X
NetPorty II X X X X X X X X
PC Slimline X X X X X X X X
PC NetBoard X X X X X X X X
InduCAN 104 X X X X X X X X
USB RS 232 PCI PC 104 Blue Tooth ISA
** X X X X X
X X X X * X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X
X X X X X X

Remarks:

* Available upon Request.
** Support USB Connector via Adaptor.

 

Vehicle Communication Interfaces Overview:

This is a brief overview of some Vehicle Communication Interfaces, we developed with and for our customers. 

 

  CAT

CAT stands for CAN Analyzer Tool and is a RS232 to CAN PC based port adapter to monitor and analyze the CAN bus data on a vehicle.
 The tool allows the user to create and change configurations.
 In online mode the CAT acquires, stores & shows data coming from the CAN bus.
 The tool allows transmitting certain frames with the CAT and offers diagnostic services to interpret frames.
 Used within the GM Service organization.

 

 



  Passthru+XS (J2534 & J2534-1 Compliant)

Customer: Independent Repair Shops
A cost effective solution to enable its use in the workshop.
Validated by MOST car manufacturers
OEMs who tested and validated the PassThru+Xs:
  - Audi: http://www.ebahn.com/vw/
  - BMW: http:\\www.bmwtechinfo.com
  - Chrysler: http:\\www.techauthority.com
  - Ford: http:\\www.motorcraft.com
  - Mercedes Benz: http:\\www.startekinfo.com
  - Porsche: https://techinfo.porsche.com
  - Toyota: http:\\www.techinfo.toyota.com
  - Volkswagen:: http://www.ebahn.com/vw/
  - Isuzu:: http:\\ www.IsuzuSource.com
 

 



  Basic+ XS
CAN to RS232 and USB interface for alternative use
CAN 2.0B ISO 11898
High speed CAN transfer Rate up to 1 MBit/s
Low speed CAN fault tolerant
On-Board 16bit micro-controller for fast CAN communication
K-Line ISO 9141 (100mA) AND K-Line ISO 14230 (KWP2000)
On-Board memory

 



  Protected XS
TCP/IP connection to the host
Supports diagnostic protocols for GMLAN, CLASSII, KWP2000
Physical interfaces: CAN (ISO 11898), J1850 (VPW), K-LINE (ISO 9141)
On-Board data processing

 



  Blue XS
Prototype CAN to Bluetooth
CAN to Blue Tooth interface
CAN 2.0B ISO 11898
CAN transfer Rate up to 1 MBit/s
K-Line ISO 9141 (100mA) & K-Line ISO 14230 (KWP2000)
On-Board memory
On-Board 16bit micro-controller for fast CAN communication

 



  OPPS / OPS

Customer: BMW Group
 Vehicle communication interface
Used within the BMW Service organization

 

 



  Part X

Customer: DaimlerChrysler
 Wireless vehicle communication interface
 Used within the Daimler Production organization

 

 

 


  Part A,B,C,D 
Customer: DaimlerChrysler
 Vehicle communication interface.
Used within the DaimlerChrysler organization.

 



  PCI-Intelli CAN
Special design for PCs with PCI slots.
The PCI- IntelliCAN is designed for real-time data acquisition.
 Processes by using a fast 16-bit microcontroller, 8 kB DPRAM, 512 kB SRAM and 128 kB Flash memory.
Hardware configuration via PCI software services, plug & play.
 DPRAM interface for host interfacing & SRAM for application execution.
Direct access to analog and digital inputs and outputs.
 Includes PC Software PcCANControl that enables the tracing activities or selected messages on the network.
Universal hardware platform for real-time network design and test tools.

 

 



  PCMCIA Type II

An on-board intelligent interface card for portable PCs with standard type II or III PCMCIA interfaces.
 Enables real-time data acquisition and can be used for diagnostic applications.
 Flexibility to change the physical transceivers just by changing the connector cable.
 Easy interfacing among PCs, laptops, and networks with automotive-protocols.
Universal hardware platform for real-time network design and test tools.
 The included software enables the tracing of all activities, or of selected messages on the network either in symbolic or in hexadecimal mode.
LevelX DLL for easy programming of complex applications.
Real-time application development under Windows 9x and NT.

 

 



  NetPorty II

PcNetBoard is a half size 8-bit PC card for automotive and industrial networks (e.g. CAN, J1850)...
 Allows use of the protocol chips by programming in assembly language or high-level languages (C++).
Memory-mapped mode or I/O-device.
Ideal platform for developing own application without strong real-time requirements.
 Easy manipulation of network protocol-chip registers through supplied software PcCANControl for 32 Bit operating Systems.
 Tracing and logging network activities, offers offline analysis.
 Jumper-selectable address range and hardware interrupt.
 Optional transceivers and protocol plug-in modules adapt basic board to a variety of applications.

 

 



  PC Slimline

Small low-cost interface board, between the PC ISA slots.
Easy interfacing among PCs with ISA and automotive and industrial CAN networks.
 Address range and interrupts selectable by jumpers and DIP switches.
 Supports PeliCAN mode by using SJA 1000.
Supports CAN Part 2.0 B active.
Ideal platform for developing own applications without strong real-time requirements.
The included software enables the tracing of all activities, or of selected messages on the CAN network either in symbolic or in hexadecimal mode.
Switchable bus termination.
 Real-time application development under Windows 9x and NT.

 

 



  PC NetBoard

8-bit PC card for automotive and industrial networks.
Presents a cost-effective solution for applications that do not require an onboard microprocessor or memory buffer.
Allows use of the protocol chips by programming in assembly language or high-level languages.
Easy manipulation of network protocol-chip registers through supplied software PcCANControl for 32 Bit operating Systems.
Generation of messages defined in symbolic or hexadecimal form.
Optional transceivers and protocol plug-in modules adapt basic board to a variety of applications.
Includes operating software and PC software that enables the tracing activities or selected messages on the network, in either symbolic or hexadecimal mode.
Tracing and logging network activities, offers offline analysis.

 

 



  InduCAN 104

Peripheral board that accesses CAN field bus applications via the PC104 port.
The single opto-isolated channel and its DC/DC converter allows integration into any kind of industrial environment with specific applications.
Presents a cost-effective solution for applications that do not require an onboard microprocessor or memory buffer.
Allows use of the protocol chips by programming in assembly language or high-level languages.
Easy manipulation of network protocol-chip registers through supplied software PcCANControl for 32 Bit operating Systems.
Generation of messages defined in symbolic or hexadecimal form.
Optional transceivers and protocol plug-in modules adapt basic board to a variety of applications.
Tracing and logging network activities, offers offline analysis.